Xfce Wiki

midori:contribute - [Building]

kalikiana — Fri, 24 May 2013 22:23:01 +0200

1369426965		current
Line 163:		Line 163:
	sudo make install</code>		sudo make install</code>

-	Once built and tested you can assemble the Midori package with a helper script	+	Once built and tested you can assemble the Midori archive with a helper script
	32-bit build:		32-bit build:
	<code bash>env MINGW_PREFIX="/usr/i686-w64-mingw32/sys-root/mingw" ./win32/makedist/makedist.midori</code>		<code bash>env MINGW_PREFIX="/usr/i686-w64-mingw32/sys-root/mingw" ./win32/makedist/makedist.midori</code>

midori:faq - [Security features]

kalikiana — Fri, 24 May 2013 11:37:04 +0200

1368442053		current
Line 73:		Line 73:

	=== Certificate Handling ===		=== Certificate Handling ===
		+
		+	Midori uses the system's ca-certificates, the exact locations depend on the distribution.

	Midori >= 0.4.7 supports [[http://git.gnome.org/browse/gcr/tree/gcr\|gcr]] for certificate display and management, you can click the lock in the urlbar to see detailed information. Earlier versions, or one without gcr will not handle certificates beyond the lock icon in the urlbar.		Midori >= 0.4.7 supports [[http://git.gnome.org/browse/gcr/tree/gcr\|gcr]] for certificate display and management, you can click the lock in the urlbar to see detailed information. Earlier versions, or one without gcr will not handle certificates beyond the lock icon in the urlbar.

translations:team_ja:long_vowel - [apps] +xfce4-dict

hashimo — Mon, 20 May 2013 17:27:58 +0200

1355832329		current
Line 126:		Line 126:
	\|xfbib \| \|		\|xfbib \| \|
	\|xfburn \| 済 \|		\|xfburn \| 済 \|
-	\|xfce4-dict \| \|	+	\|xfce4-dict \| 済 \|
	\|xfce4-mixer \| 済 \|		\|xfce4-mixer \| 済 \|
	\|xfce4-notifyd \| 済 \|		\|xfce4-notifyd \| 済 \|

recommendedapps - -Epdfview +mupdf +zathura

sixsixfive — Sat, 18 May 2013 13:40:21 +0200

1365342853		current
Line 86:		Line 86:
	* Remarks: //Can pull some gnome dependencies (printing is based on libgnomeprint, for example.) Compile yourself to avoid them //		* Remarks: //Can pull some gnome dependencies (printing is based on libgnomeprint, for example.) Compile yourself to avoid them //

-	==== Epdfview ====	+	==== Zathura ====
-	* Description: A free lightweight PDF document viewer	+	* Description: minimalistic document viewer, that mainly focuses on keyboard interaction.
-	* Website: http://www.emma-soft.com/projects/epdfview/	+	* Website: http://pwmt.org/projects/zathura/

		+	==== MuPDF ====
		+	* Description: a lightweight PDF and XPS viewer
		+	* Website: http://www.mupdf.com/
	==== Gnumeric ====		==== Gnumeric ====
	* Description: Spreadsheet application		* Description: Spreadsheet application

design:parole-ui

bluesabre — Thu, 09 May 2013 15:11:54 +0200

1368090582		current
Line 26:		Line 26:
	* Rename "View" to "Video" - bluesabre		* Rename "View" to "Video" - bluesabre
	* I also thought about that, but then the View->playlist menuitem would have to be moved away for consistency (most likely to the Playback menu)		* I also thought about that, but then the View->playlist menuitem would have to be moved away for consistency (most likely to the Playback menu)
-	* New Menu: "Media", "Video", "Audio", "Tools", "Help" - bluesabre	+	* New Menu: "Media", "Video", "Audio", "Playback", "Tools", "Help" - bluesabre
	* wait, what about "Playback"? :)		* wait, what about "Playback"? :)
		+	* What? It's definitely there... ;)

wish_list

fowlslegs — Wed, 08 May 2013 04:01:26 +0200

1357390529		current
Line 256:		Line 256:
	* <del>Key binding to popup the window menu (Alt + Spacebar).</del>		* <del>Key binding to popup the window menu (Alt + Spacebar).</del>
	* <del>Cycle through workspaces, like Alt + Tab for applications.</del>		* <del>Cycle through workspaces, like Alt + Tab for applications.</del>
		+	* While using the Alt + Tab window switching shortcut allow selecting a window by left click with the mouse.
	* Key binding for fvwm/metacity style 'raiselower' function. (I've been trying to live with separate raise and lower keys and it really slows me down compared to the 'raise if below, else lower' single key that lets you cycle through your stacked windows.)		* Key binding for fvwm/metacity style 'raiselower' function. (I've been trying to live with separate raise and lower keys and it really slows me down compared to the 'raise if below, else lower' single key that lets you cycle through your stacked windows.)
	* Key binding for moving a window to different heads (=monitors) on one workspace pretty much as it can be moved over different workspaces (left, right, up, down ...). Maybe one could introduce an option at the same time such that the user can decide what happens when he triggers the move of a window on the leftmost monitor to the left: it could be moved to the rightmost monitor either on the current workspace or on the workspace left to the current workspace.		* Key binding for moving a window to different heads (=monitors) on one workspace pretty much as it can be moved over different workspaces (left, right, up, down ...). Maybe one could introduce an option at the same time such that the user can decide what happens when he triggers the move of a window on the leftmost monitor to the left: it could be moved to the rightmost monitor either on the current workspace or on the workspace left to the current workspace.

zh-cn:start - [Future]

yjwork — Sun, 28 Apr 2013 02:46:59 +0200

1364452786		current
Line 39:		Line 39:


-	==== Future ====	+	==== 将来 ====

	* [[releng:future\|Ideas to contribute that will likely happen in future releases]]		* [[releng:future\|Ideas to contribute that will likely happen in future releases]]
-
	==== Xfce 4.12 ====		==== Xfce 4.12 ====

zh-cn:recommendedapps - [Orage]

yjwork — Wed, 24 Apr 2013 03:55:19 +0200

1366768477		current
Line 77:		Line 77:

	==== Orage ====		==== Orage ====
-	* 描述: Modern calendar application	+	* 描述: 日历应用程序
	* 网站: http://www.kolumbus.fi/~w408237/orage/		* 网站: http://www.kolumbus.fi/~w408237/orage/
-	* 注释: Xfce Project****	+	* 注释: Xfce 项目
	==== Abiword ====		==== Abiword ====
	* 描述：一个功能全面但又小巧快速的字处理程序		* 描述：一个功能全面但又小巧快速的字处理程序

zh-cn:howto:xfwm4_theme - [荣誉]

haobug — Sun, 21 Apr 2013 12:46:22 +0200

1366541050		current
Line 250:		Line 250:
	\| left-active \| left-inactive \| \|		\| left-active \| left-inactive \| \|

-	===== 制作 =====	+	===== 荣誉 =====
	这条 how-to 最初由 Drewbian（drewbian at tsn dot cc）创建，后来被 Olivier Fourdan（fourdan at xfce dot org）Fourdan 修改。		这条 how-to 最初由 Drewbian（drewbian at tsn dot cc）创建，后来被 Olivier Fourdan（fourdan at xfce dot org）Fourdan 修改。
-

zh-cn:dev:howto:release - created

haobug — Sun, 21 Apr 2013 07:14:42 +0200

	current
Line 1:	Line 1:
	+	====== Xfce 发布 HOWTO======
	+	这如何正在改进中，但它可能会帮助。
	+	可以自由作出贡献。

	+
	+	===== 发布在释放前的注意事项 =====
	+	* 翻译是是否为最新，翻译者知道你要发布。
	+	* 所有严重问题的修复补丁都已经全部打上了。
	+	* 你的感觉：“是的，代码已经能够向世界发布了，每个人都能 enjoy it”;)
	+
	+	===== 发布之前要更新文件 =====
	+	- 发布信息：''ChangeLog''，''NEWS''。
	+	- 通用信息：''NEWS''，''AUTHORS''，''THANKS''，''TODO''（如果存在）。
	+
	+	===== 配置脚本 =====
	+	- 编辑 configure 脚本模板文件 ''configure.in.in'' 或 ''configure.ac.in''。
	+	- 设置发布的软件包的版本（''<package>_version_major'', ''<package>_version_minor'' and ''<package>_version_micro''）。
	+	- 移除 ''<package>_version_tag'' ''git'' 标签。
	+	- 检查的构建依赖关系。
	+
	+	===== 检查发布包 =====
	+	- 运行 ''./autogen.sh''.
	+	- 运行 ''make distcheck''
	+	- 检查自动生成的文件：''INSTALL'', ''COPYING''
	+	- 如果在这个步一切正常，提交所有发布的更改到 master 分支。
	+	- 现在，您可以当前 master 分支打标签了：\\<code>git tag -a <package>-<version>
	+	git push
	+	git push --tags</code>可以用 GPG 密钥签名标签，通过 ''git tag'' 命令增加一个参数。更多信息关于标签的内容请阅读''[[http://www.kernel.org/pub/software/scm/git/docs/git-tag.html\|git-tag]]''手册。
	+	- 现在你可以使用[[https://releases.xfce.org\|xfce 发布管理器]]。按照网站上的说明做。
	+
	+	===== 发布之后 =====
	+	- 编辑 ''configure.in.in'' 或 ''configure.ac.in''。
	+	- 重新设置 ''<package>_version_tag'' 为 ''git''。

zh-cn:howto:debug - created

haobug — Sun, 21 Apr 2013 06:39:38 +0200

1366519178		current
Line 1:		Line 1:
	====== 调试 Xfce ======		====== 调试 Xfce ======

-	当然，我们都知道 Xfce 是无故障且稳如磐石。所以这份 HOWTO 没啥存在的理由。	+	当然，我们都知道 Xfce 是 bugfree and stable as a rock。所以这份 HOWTO 没啥存在的理由。

	可是，一些（yet）未知的原因，会引起应用程序崩溃。我们不确定这些神奇事件的源头。有些人亲眼目睹 Rodents 的存在，这中间可能有些联系，但不确切。		可是，一些（yet）未知的原因，会引起应用程序崩溃。我们不确定这些神奇事件的源头。有些人亲眼目睹 Rodents 的存在，这中间可能有些联系，但不确切。

	不管怎样，如果有神秘事件发生，这一种可以帮助开发都解决问题的手段：		不管怎样，如果有神秘事件发生，这一种可以帮助开发都解决问题的手段：
-
	===== 确认崩溃 =====		===== 确认崩溃 =====
	当应用程序崩溃时，它通常会由于 SIG_SEGV 信号，或段错误退出。这意味着该操作系统检测到应用程序试图访问不允许访问的内存块（段）。操作系统向应用程序发送信号，从而引起应用程序立即中止。		当应用程序崩溃时，它通常会由于 SIG_SEGV 信号，或段错误退出。这意味着该操作系统检测到应用程序试图访问不允许访问的内存块（段）。操作系统向应用程序发送信号，从而引起应用程序立即中止。

howto:debug

haobug — Sun, 21 Apr 2013 06:38:23 +0200

1366519103		current
Line 1:		Line 1:
-	====== 调试 Xfce ======	+	====== Debugging Xfce ======

-	当然，我们都知道 Xfce 是无故障且稳如磐石。所以这份 HOWTO 没啥存在的理由。	+	Ofcourse, we all know Xfce is bugfree and stable as a rock. So there shouldn't be any reason for this howto to exist.

-	可是，一些（yet）未知的原因，会引起应用程序崩溃。我们不确定这些神奇事件的源头。有些人亲眼目睹 Rodents 的存在，这中间可能有些联系，但不确切。	+	However, due to some (yet) unexplained cause, it can happen that an application crashes. We are not sure of the origin of these mysterious events. Some people have witnessed the presence of Rodents, maybe there is a relationship, but no-one knows for sure.

-	不管怎样，如果有神秘事件发生，这是一种可以帮助开发都解决问题的手段：	+	However, if these mysterious events happen, this is the way you can help the developers resolve it:

-	===== 确认崩溃 =====	+	===== Identifying a crash =====
-	当应用程序崩溃时，它通常会由于 SIG_SEGV 信号，或段错误退出。这意味着该操作系统检测到应用程序试图访问不允许访问的内存块（段）。操作系统向应用程序发送信号，从而引起应用程序立即中止。	+	When an application crashed, it usually exits due to SIG_SEGV, a segmentation-fault. This means the operating-system has detected that the application tries to access a piece (segment) of memory that it is not allowed to. The operating-system then sends the application a signal causing an immediate abort.

-	如果应用程序从终端启动，输出可能像下面这样：	+	When the application is started from a terminal, this can look like the following example:
	<code>		<code>
	stephan@hermes:~$ ristretto		stephan@hermes:~$ ristretto
-	段错误	+	Segmentation fault
	stephan@hermes:~$		stephan@hermes:~$
	</code>		</code>

-	这条消息只是简短的描述，让我们尝试找出它崩溃的原因。	+	This message is little descriptive, so lets try to find out why it crashed.

-	===== 在调试器中运行程序 =====	+	===== Running the application in a debugger =====
-	要找出应用程序为什么崩溃，首先要在调试器中运行它。 GNU/Linux 上最常用的调试器是 gdb（GNU 调试器）。	+	To find out why the application crashed, the first thing to try is running it in a debugger. The most commonly used debugger on GNU/Linux is gdb, the GNU debugger.

-	使用 gdb ，你只用从命令行里启动它，把要调试应用程序作为它第一个参数，看下面的例子：	+	To use gdb, you just start it from the command-line with the application to debug as a first argument to the application, see the following example:
	<code>		<code>
	stephan@hermes:~$ gdb ristretto		stephan@hermes:~$ gdb ristretto
Line 38:		Line 38:
	</code>		</code>

-	现在 gdb 是启动了，但应用程序还没有做任何事情。	+	Now gdb is started, but the application itself is not doing anything yet.
-	要启动的应用程序，键入 ''run''，一些你可能想给应用程序的参数，然后 ''Enter''。	+	To start the application, type ''run'', maybe some arguments you want to supply to the application, and press ''Enter''.
		+
		+	Now, if the application does not crash immediately, you should see it start and a few lines appear in the debugger. (See the following example)

-	现在，如果应用程序没有立即崩溃，你可以看到它启动了并且调试器里出现几行字。（见下面的例子）
	<code>		<code>
	...		...
Line 49:		Line 50:
	</code>		</code>

-	现在，执行让应用程序崩溃所需的动作。下一步的调试器看起来像这样：	+	Now, perform the actions required to crash the application. The next step of the debugger looks something like this:
	<code>		<code>
	(gdb) run		(gdb) run
Line 64:		Line 66:
	</code>		</code>

-	当然，应用程序的不同，或 bug 的不同会有不同的输出，所以如果输出不一样不用担心。	+	Ofcourse, the output-lines differ from application to application and from bug to bug, so you shouldn't be worried if it looks different.
		+
		+	The next step is getting a so called 'backtrace'. This backtrace traces the flow through the application that leads to this crash:

-	下一步是得到一个所谓的“回溯”（backtrace）。回溯可以追踪到导致应用程序崩溃的流程：
	<code>		<code>
	(gdb) backtrace		(gdb) backtrace
Line 161:		Line 164:
	(gdb)		(gdb)
	</code>		</code>
-	将它复制到一个文本文件中，并把它添加到 https://bugzilla.xfce.org/ 的 bug 报告。

-	但如果回溯的最后一行以 0x000000000000（空指针）开始， then the backtrace is not of any good。应用程序跳转到一个空指针，然后在内存里瞎跑一阵最后死掉。如果是这种情况，请尝试使用 valgrind 。 --（未完待续）	+	Copy this to a text-file, and add it to a bugreport on https://bugzilla.xfce.org/
		+
		+	If the last line of the backtrace starts with 0x000000000000 (a NULL-pointer) then the backtrace is not of any good. The application jumped to a NULL-pointer and then wandered through memory aimlessly before finally dying. If this happens, try valgrind. -- (to be continued)

zh-cn:faq - [安装]

yjwork — Mon, 15 Apr 2013 10:46:49 +0200

1334060386		current
Line 39:		Line 39:
	* MidnightBSD: pkg_add -r xfce4		* MidnightBSD: pkg_add -r xfce4
	* Mythbuntu: sudo apt-get install mythbuntu-desktop		* Mythbuntu: sudo apt-get install mythbuntu-desktop
		+	* [[http://www.netbsd.org/docs/guide/en/chap-x.html#chap-x-other-window-managers\|NetBSD]] (pkg_add xfce4)
	* Ubuntu: sudo apt-get install xubuntu-desktop ([[http://packages.ubuntu.com/search?keywords=xubuntu-desktop\|软件包描述]])		* Ubuntu: sudo apt-get install xubuntu-desktop ([[http://packages.ubuntu.com/search?keywords=xubuntu-desktop\|软件包描述]])
	* [[http://www.xfce.org/download/building\|从源代码编译安装]]。用此方式您不仅可以打造自己的个性化桌面，而且还可以尝鲜最新的功能和缺陷修复。		* [[http://www.xfce.org/download/building\|从源代码编译安装]]。用此方式您不仅可以打造自己的个性化桌面，而且还可以尝鲜最新的功能和缺陷修复。
-
	====== 登录 Xfce 桌面 ======		====== 登录 Xfce 桌面 ======

zh-cn:minimum_requirements

yjwork — Mon, 15 Apr 2013 10:41:38 +0200

1366015006		current
Line 1:		Line 1:
	======系统需求======		======系统需求======

-	Xfce runs on over [[http://distrowatch.com/search.php?desktop=Xfce\|80 UNIX-like distributions]]. Below is a short list of the distributions that use Xfce as their primary, default Desktop Environment(DE) as well as their minimum system requirements for installation.	+	Xfce 运行于 [[http://distrowatch.com/search.php?desktop=Xfce\|80 多个 UNIX-like 发行版]]. Below is a short list of the distributions that use Xfce as their primary, default Desktop Environment(DE) as well as their minimum system requirements for installation.

	[[http://xubuntu.org/getxubuntu/\| Xubuntu]]:		[[http://xubuntu.org/getxubuntu/\| Xubuntu]]:

-	Xubuntu is a community‑developed, Ubuntu‑based Linux operating system. Its minimum requirements are:	+	Xubuntu 是一个社区开发的，基于Ubuntu的Linux操作系统。它的最低要求是：
	* CPU: 500Mhz+		* CPU: 500Mhz+
	* 内存: 256MiB+ （Desktop/LiveCD版） - 推荐 512MiB		* 内存: 256MiB+ （Desktop/LiveCD版） - 推荐 512MiB
Line 29:		Line 29:
	Mythbuntu is //"an official Ubuntu flavor focused upon setting up a standalone MythTV based PVR system.Mythbuntu uses the XFCE desktop. All unnecessary standard Ubuntu applications such as LibreOffice, Evolution, and a full Gnome desktop are not installed in a default Mythbuntu install"// Its minimum requirements are:		Mythbuntu is //"an official Ubuntu flavor focused upon setting up a standalone MythTV based PVR system.Mythbuntu uses the XFCE desktop. All unnecessary standard Ubuntu applications such as LibreOffice, Evolution, and a full Gnome desktop are not installed in a default Mythbuntu install"// Its minimum requirements are:
	* CPU: 1.0 GHz x86 or x86_64 Processor		* CPU: 1.0 GHz x86 or x86_64 Processor
-	* 内存: 512 MB of system memory (RAM)	+	* 内存: 512 MB 系统内存 (RAM)
-	* Hard drive space: 2 GB of disk space (Frontend Role) / 10GB + 1.5GB/hour for storage of SD material (Backend Role)	+	* 磁盘空间: 2 GB 磁盘空间 (Frontend Role) / 10GB + 1.5GB/hour for storage of SD material (Backend Role)
	* Graphics card capable of 1024x768 resolution (if using VDPAU, 256MB minimum)		* Graphics card capable of 1024x768 resolution (if using VDPAU, 256MB minimum)
	* Supported TV Tuner Card (Backend Role)		* Supported TV Tuner Card (Backend Role)

dev:garcon

hptt — Thu, 11 Apr 2013 14:57:09 +0200

1335700654		current
Line 8:		Line 8:
	===== File Monitoring =====		===== File Monitoring =====

-	We'd like the give the library build-in support for monitoring menu changes. This means we monitor the .menu file(s) for changes (for example made by Alacarte) and the .desktop file directories for added/removed/changed desktop files. When something changed we don't want to rebuild everything, but rather update and trigger some signals and notify properties.	+	We'd like the give the library built-in support for monitoring menu changes. This means we monitor the .menu file(s) for changes (for example made by Alacarte) and the .desktop file directories for added/removed/changed desktop files. When something changed we don't want to rebuild everything, but rather update and trigger some signals and notify properties.

pt-br:minimum_requirements

neliton — Tue, 09 Apr 2013 20:58:35 +0200

1365533460		current
Line 1:		Line 1:
-	===== Requesitos mínimos do sistema =====	+	===== Requisitos mínimos do sistema =====

	[[http://xubuntu.org/getxubuntu/\|Xubuntu:]]		[[http://xubuntu.org/getxubuntu/\|Xubuntu:]]

pt-br:start - [Wiki do Xfce]

neliton — Mon, 08 Apr 2013 03:13:04 +0200

1365378677		current
Line 2:		Line 2:


-	Bem-vindo às páginas wiki do Xfce. Este é o lugar onde usuários podem colaborar com novas funções, ideias e várias outras coisas relacionadas ao Xfce. Não tenha medo de editar o conteúdo deste wiki. Encontre algo que possa ser melhorado ou estendido e então clique no botão editar!// Note que devido a atividades recentes de spam, você precisará se [[https://wiki.xfce.org/start?do=register\|registrar]] para poder editar páginas.// O wiki também está disponível sob [[https://wiki.xfce.org\|https]].	+	Bem-vindo às páginas wiki do Xfce. Este é o lugar onde usuários podem colaborar com novas funções, ideias e várias outras coisas relacionadas ao Xfce. Não tenha medo de editar o conteúdo deste wiki. Encontre algo que possa ser melhorado ou estendido e então clique no botão editar!// Note que, devido a atividades recentes de spam, você precisará se [[https://wiki.xfce.org/start?do=register\|registrar]] para poder editar páginas.// O wiki também está disponível em [[https://wiki.xfce.org\|https]].

	====== Xfce ======		====== Xfce ======

pt-br:contribute - [Tradução]

neliton — Mon, 08 Apr 2013 02:31:33 +0200

1365381058		current
Line 13:		Line 13:
	A tradução do Xfce possibilita que ele seja aceito por mais pessoas. Você não quer programas que estejam em inglês, quer? ;-)		A tradução do Xfce possibilita que ele seja aceito por mais pessoas. Você não quer programas que estejam em inglês, quer? ;-)

-	O Xfce usa uma plataforma do [[http://translations.xfce.org/\|Transifex]] para as traduções. Ao se inscrever, você pode se juntar à equipe de tradução do seu idioma, e outros, e pode começar a traduzir. Você pode conhecer outras pessoas da equipe e tentar compartilhar o trabalho com elas.	+	O Xfce usa a plataforma [[http://translations.xfce.org/\|Transifex]] para as traduções. Ao se inscrever, você pode se juntar à equipe de tradução do seu idioma, e outros, e pode começar a traduzir. Você pode conhecer outras pessoas da equipe e tentar compartilhar o trabalho com elas.

	Se você é novo nas traduções, está tudo explicado [[translations\|aqui]].		Se você é novo nas traduções, está tudo explicado [[translations\|aqui]].

pt-br:translations - [Informação sobre os arquivos PO]

neliton — Mon, 08 Apr 2013 02:27:00 +0200

1365380647		current
Line 19:		Line 19:

	===== Informação sobre os arquivos PO =====		===== Informação sobre os arquivos PO =====
-	Tem a [[translations/Translation guidance in Xfce\|orientação de tradução do Daichi]] para Xfce. Tem a lista de [[translations/translation software\|softwares]] para usar para tradução. E há também é a lista de [[translations/languages\|idiomas e códigos de idiomas]] para usar nos nomes dos arquivos PO.	+	Há o [[translations/Translation guidance in Xfce\|Guia de tradução do Daichi]] para Xfce. Há a lista de [[translations/translation software\|programas]] para usar para tradução. E há também é a lista de [[translations/languages\|idiomas e códigos de idiomas]] para usar nos nomes dos arquivos PO.

	===== Manipulando arquivos PO =====		===== Manipulando arquivos PO =====

translations - [Teams]

neliton — Mon, 08 Apr 2013 02:22:30 +0200

1364158985		current
Line 7:		Line 7:

	===== Teams =====		===== Teams =====
-	The [[translations/language maintainers\|list of teams]] contains the maintainers of each language. Don't be shy to insert the team of your language (even if you are the only translator), that can only make it more friendly for new translators to join in. You can have a look at the other teams pages to get an idea about what you could put in yours. If you are using an external resource to exchange discussions and keep web pages like the [[http://groups.google.com/support/\|Google Groups]], than simply put a link on the teams page.	+	The [[translations/language maintainers\|list of teams]] contains the maintainers of each language. Don't be shy to insert the team of your language (even if you are the only translator), that can only make it more friendly for new translators to join in. You can have a look at the other teams pages to get an idea about what you could put in yours. If you are using an external resource to exchange discussions and keep web pages like the [[http://groups.google.com/support/\|Google Groups]], then simply put a link on the teams page.

	===== Statistics =====		===== Statistics =====

1355832329		current
Line 126:		Line 126:
	\|xfbib \| \|		\|xfbib \| \|
	\|xfburn \| 済 \|		\|xfburn \| 済 \|
-	\|xfce4-dict \| \|	+	\|xfce4-dict \| 済 \|
	\|xfce4-mixer \| 済 \|		\|xfce4-mixer \| 済 \|
	\|xfce4-notifyd \| 済 \|		\|xfce4-notifyd \| 済 \|