This documentation is obsolete ! Please see http://docs.xfce.org/contribute/dev/start
If you have an xfce.org Subversion account that does not include ssh access (that is, you check in using https), you will need to apply to get your account converted here. Fill out the form with the same info you used previously, but remember to include a ssh public key in the appropriate box. Translators: see here.
If you used the “old” git.xfce.org, and used clone/push URLs like “git@git.xfce.org:$USER/$MODULE”, then you should follow the directions above as well.
You will receive an email with instructions when your account is ready.
If you already have a ssh shell account on git.xfce.org (aka mocha.xfce.org), your account information has not been changed and you are ready to go.
If you do not have an xfce.org account at all, you'll need to request one as explained on that page.
If you are uncertain of the clone URL to use for a particular module, please find and click on the module in the listing in CGit. Clone URLs are listed at the bottom of the page for each module.
In short: If you don't have a ssh account and just want a read-only copy of the source, you'll want to do:
git clone git://git.xfce.org/$TYPE/$MODULE
or
git clone http://git.xfce.org/$TYPE/$MODULE
$TYPE is one of 'apps', 'bindings', 'xfce', etc. See the italicized group names in the CGit index.
Committers, see below.
Before you even think about pushing changes, you must set your name and email address to something valid in your local Git config:
git config --global user.name "J. Random Hacker" git config --global user.email jrandom@example.com
Also, you must subscribe this address to the xfce4-commits mailing list. If you don't wish to receive mail from this list, you can disable mail delivery. If you do not subscribe, commit notifications will not go to the list. We're working on a way to remove this requirement, but for now you will need to be subscribed. At the moment, committing with an @xfce.org email doesn't put that requirement thus you can run the command above without the --global option in your individual Xfce projects.
If you have a ssh account, you can clone a repository with:
git clone ssh://git@git.xfce.org/$TYPE/$MODULE
This will automatically set up the 'origin' remote in the cloned repository to point to that location, so a “git push” will do the right thing. You can also clone through a regular git: url and add the following snippet to .git/config :
[url "ssh://git@git.xfce.org"]
pushInsteadOf = "git://git.xfce.org"
Unfortunately, we cannot support https pushes at this time due to limitations in the Git http protocol support. If you are unable to communicate with git.xfce.org on port 22, git push will not work for you.
Translators should use our Transifex install to submit translation updates. Direct access to the git repository is no longer provided.
If you do not have an account, register for one at our Transifex site and inquire on xfce-i18n@xfce.org about commit access. See our translations page for more information.
To change your password and manage your active ssh keys, you should login to the release manager and go to the profile page.
For 'Goodies' developers, we used to have an “open repository creation” policy in our Subversion repo in which any user with write access could create a new module for a new project. With the move to Git, this is no longer possible. You will need to request the creation of a new Git repo by emailing xfce-repo-admin@xfce.org to request a new module. Please include your git.xfce.org ssh username, the module name, which category it should be under (apps, art, bindings, libs, panel-plugins, or thunar-plugins), a description of the module, and a rationale as to why it should be hosted on git.xfce.org (instead of github, gitorious, etc.). Note that requests to be added to the 'admin,' 'archive,' or 'xfce' categories will be denied.
In order to display repository metadata on the CGit listings and other places, modules will need a file called “module.xml” in the root of their tree (on their master branch). This file should be a DOAP file describing the project. You can work off this template.
Please at least provide <foaf:name>, <foaf:mbox>, and <gnome:userid> elements (the latter of which should be your Xfce ssh account username). You can of course provide more information about yourself if you'd like; see foaf:Person and foaf:Agent.
For now, only include one <maintainer> element block. If there are other active developers (or former developers you wish to credit), use a <developer> element block for each one.
Note that the file in your git repository should actually be named “module.xml”. Do NOT replace “module” with the actual name of your module.
Changes will not show up immediately; the listings are only regenerated twice daily.
We are doing away with the goodies-commits email list. All commit mails in all git repositories will go to the xfce4-commits list. The subject lines of the emails should be pretty easy to filter on if you only want a subset of emails. We generate one commit mail per commit object (and for some other things too), so if you push a large number of commits, you'll generate a large number of emails.
See git-tips-and-tricks.
This section is only useful for developers who were using git-svn to access our old Subversion repositories.
If you have a git-svn clone and there are commits in it that you never pushed to svn, and want to merge them into a new git clone, it can be a little bit of a pain. Because of how the repositories were converted, the git-svn clones do not have the same SHA1 sums for any old commits (that is, commits that were pushed to the svn repo). So you can't just import a branch directly and expect it to work.
The following is what I (Brian) did. It's really manual and annoying. If anyone has a better way, feel free to edit this and describe your method.
Here I'll use my xfdesktop repo as an example. I'll refer to the new git clone simply as xfdesktop, and the git-svn clone as xfdesktop.git-svn. I want to merge the branch new-drawing from xfdesktop.git-svn over to xfdesktop. Here's what I'd do:
$ cd xfdesktop $ git checkout master $ git checkout -b new-drawing $ git fetch ../xfdesktop.git-svn new-drawing:refs/heads/tmpbranch $ git log tmpbranch
At this point, I'll look at the log output and figure out which commits were never pushed to the main Subversion repository. It's easy to tell because those commits don't have git-svn-id: lines at the end of each commit message.
Now, I make a list of the SHA1 hashes of the commits I need to migrate. I'll order them in the reverse order, so that the first commit to migrate will be the oldest out of my list. In my case, I only have two commits, so my list (after reordering) looks like this:
d1e0179e8b6f00e4f452513c100f674f7d35dc11 e3633d52774bd9a2a20ef9af37d3f72f964a2f54
At this point I could make a script to cherry pick them all in order, but since I only have two I'll just do it manually:
$ git cherry-pick d1e0179e8b6f00e4f452513c100f674f7d35dc11 $ git cherry-pick e3633d52774bd9a2a20ef9af37d3f72f964a2f54
(Note: if there's only one commit to merge, you can skip the above and just do git cherry-pick tmpbranch, which will just cherry pick the HEAD commit of tmpbranch.)
Now, if I got any merge errors after one of the cherry pick commands, I'd have to stop there and fix it up first:
$ vim src/xfdesktop-icon-view.c [fix the merge conflict and save] $ git add src/xfdesktop-icon-view.c
The merge conflict error message provided a useful bit of info: after fixing the conflicts, you can easily re-commit using the same log message, author, and author date as before by using the -c option to git commit:
$ git commit -c e3633d52
Note that the argument to -c is just a shortened form of the SHA1 hash for the commit that caused conflicts.
Now that we're done, we can delete the temporary branch:
$ git branch -D tmpbranch
You'll have to repeat this process for any other local branch you have in the old git-svn clone. As I said, yes, it's annoying, repetitive, manual, and time-consuming (if you have a lot of branches/clones to convert). If anyone knows a better way, feel free to detail it here.
After you finish with all branches in a particular module, you may want to run:
$ git gc --prune=now
This will remove all the dangling commits, trees, and blobs left over from the probably-large number of mismatched objects discarded when you deleted tmpbranch.